|
Smart GPS Receiver
MODEL: EB-168J
Compact Smart GPS Receiver with wide voltage &
1PPS timing output for Navigation
EB-168J is an outstanding smart GPS Receiver. Its excellent performance can easily conquer the most difficult tasks. In addition, it provides various functions to meet customers' personal needs. Also EB-168J employs JRC powerful GPS receiver chipset solution, provides marvelous navigation performance under dynamic conditions in the areas with limited sky view like urban canyons and also has high sensitivity for weak signal operation without compromising accuracy. Undoubtedly, EB-168J is the best choice for you.
Features:
l Very Fast TTFF(Time-To-First-Fix)
l 8MBit Flash Memory
l Sensitivity: -135dBm(Tracking)
l NMEA0183 protocols
l Accurate 1PPS timing output
l RS-232 interface
l Thin module form factor –
45mm (L) x45mm (W) x6.1mm (H)
l JRC satellite positioning chip
l 13 parallel channels
Applications:
l Car Navigation.
l Fleet Management.
l Mileage Management.
l Tracking devices/system.
l Support 1pps output for timer.
l Mapping devices for PC & Pocket PC.
l Personal Navigation or touring devices.
l AVL and Location-Based service system.
l Data logging for marine Navigation.
Specifications:
|
Specifications |
Parameter |
Description |
|
Receiver Type |
|
L1 frequency, C/A code(SPS),
13 channels |
|
Sensitivity |
|
-135 dBm (at NAY-3600G level) |
|
Datum |
|
WGS-84(sefault,46datums selectable) |
|
Accuracy (Selective availability off) |
Position |
10m 2DRMS (PDOP=2.5,HDOP=1.5) |
|
Speed |
0.04 m/sec. RMS(PDOP=2.5,HDOP=1.5) |
|
Course |
=<0.14degree RMS(Reference value) |
|
DGPS |
Position |
7m 2DRMS(Reference value) |
|
Acquisition |
Cold start |
40 sec. (typical) |
|
Warm start |
33 sec. (typical) |
|
Hot start |
8 sec. (typical) |
|
Re-acquisition Time |
|
3 sec. (within 5 sec. Block out) |
|
Data Output Rate |
|
1 sec. |
|
Dynamics |
Velocity |
200 km/h. |
|
Acceleration |
19.6 m/s2 |
|
Data I/O |
Interface |
CMOS level (3.3V) |
|
Output |
TXD0 4800bps (Position Data Output) |
|
Input |
RXD0 4800bps (Initial Setting Data Input)
RXD1 1200bps (DGPS Correction Data Input) |
|
Primary Power |
|
+7V ~ 32V DC |
|
|
|
|
